Experimental Study on a Prestressed Frame of Two Spans Under Unsymmetric Load

By the experimental study on a full-dimensioned prestressed frame of two spans, the relative factors are analyzed such as relative height of equivalent compression zone in critical section, secondary moment, ratio of beam rigidity to column and development of cracks in the top of columns etc., which influence the moment distribution of the post-tensioned prestressed concrete frame from the side of internal force redistribution. It is believed that that the factors of relative height of concrete equivalent compression zone and secondary moment influence the moment modulation in most degree, and ratio of column rigidity to beam also plays a part in the moment modulation to some extent. Second, the plastic joints of frame with excessive spans exit in the span which endure the whole load, at last the whole frame is destroyed because of the destruction of the loading frame, the influence to the non-loading span is little.     

竖向荷载下弹性支承直墙拱反弯点理论分析

在工程实践中,直墙拱应用较多。由于拱脚位移的存在,合理假设拱脚约束为转角约束、竖向约束和水平弹性约束,应用力法推导出了在弯矩、剪力和轴力共同作用下直墙拱沿弧长的弯矩公式。研究了竖向均布荷载、竖向三角形荷载和竖向集中力荷载作用下,直墙拱沿弧长的弯矩分布及反弯点形成的规律;发现在3种荷载作用下,使得拱脚弯矩为零时的圆心角依次减小。取弹簧支座刚度为等效的下端固支、上端允许水平位移的直墙的抗推刚度,得出了随着直墙高度增加,圆弧拱拱顶弯矩增大而拱脚弯矩减小的变化规律。在直墙拱的设计中,建议选取合适的直墙高度和使得圆弧拱拱脚弯矩为零的圆心角大小,从而有利于提高结构抗弯承载力及拱脚抗剪承载力。     

Analysis of Structure with Tuned Mass Damper under Earthquake

The analysis of vibration response of structure with TMD is carried out under earthquake ,considering the ground-structure interaction. The varying rule of square difference of displacement of structure with the TMD on or off by changing the first inherent frequency is also presented .It has been proved by comparing and analyzing that a TMDstructure with optimum parameters can efficiently reduce the vibration of structure under strong wind and earthquake,when the main frequency of the ground motion is within the range of TMD vibration reducing frequency.     

Melt Flow in Alloy Melted Pool Under the Action of Laser

Melt flow in the course of laser alloying is considered on the basis of mechanics. The findings show that the melt flow in laser alloying pool is mainly controlled by two action forces,i. e. the surface tension force on alloying pool.surface,caused by the temperature difference on the pool surface and the buoyancy force in alloying pool caused by the temperature difference in the horizontal direction in the melt pool. These two forces differ in their acting areas. The analysis of the Bond dimensionless number used for laser alloying shows that the two force actions are in the same order,and almost equal under the certain condition.     

Behavior and Design of High-strength Bolt in Tensile Connection

The tensile strength of high strength bolt is affected by many factors, including prying force. The prying force can result in the increment of bolt force, for which the connection failed ahead of time. Several methods are presented for calculating the prying force. In the China's "Code for Design of Steel Structure" (GB50017), there is no formula for calculation of prying force and a factor of 0.8 is considered in formula for tensile strength of bolt for taking the prying force into account. It is proposed that the design value of tensile resistance for high strength bolt should be increased.     

Enterprise Culture and Enterprise Credit in Enterprise Core Competitive Force

Based on the content of enterprise culture and enterprise credit, it is pointed out that the enterprise culture related to the enterprise core competitive force.In this paper, from the viewpoint of combining theory with practice, the intension, function and mutual relations between them are described and their significance in the market competition as well.The potential things,which the enterprise staffs are seeking for, from its inherent mind and the enterprise theory are the enterprise culture which becomes the enterprise core competitive force in its actual sense.The enterprise credit, as the enterprise culture in its ideological sphere, is an essential factor, which greatly affects the enterprise core competitive force.At last the authors provide some good suggestions on how to cultivate enterprise credit and to build enterprise culture.     

Experimental Research on High-strength Inorganic Anchoring Material

A new type of inorganic anchoring material is developed as a substitution for anchoring adhesive to overcome some imperfections in the process of planting reinforcing steel bar.The mix proportion of the anchoring material is determined by experiments.The compressive strength,adhesive force to concrete,volume stability and anchoring force with steel bar are studied.The early strength of the anchoring inorganic material is quite high: for 1d up to 38.5MPa and 3d up to 60MPa.It is a good adhesive to concrete and the adhesive strength of 28d is about 2MPa.The anchoring material will have tiny volume expansion with the age,which is beneficial to enhancing the anchoring force.The essential component of the inorganic anchoring material is cement-based material,so some defects of the organic macromolecular material can be avoided,such as poor stability and requirement for vigorous construction conditions.Its characteristics in early strength,adhesive force to concrete and volume expansion can satisfy the requirement of the construction to the planting reinforcing steel bar and the loading force,thus it can be used as a substituting material for anchoring adhesive.